Build ideas / Lean-to shed
Lean-to shed
Step 1 of 4 · add 1 tile
Lay the floor
Put one square flat on the ground.
Open this build in the play room
The trick
One square leaned at 60 degrees from the low back wall makes the whole sloping roof, and a triangle in each side closes the gap and grabs the roof edge so it holds.
What you will need
- 5 square tiles
- 2 triangle tiles
Step by step
1. Lay the floor
Put one square flat on the ground.
2. Stand three walls
Stand a wall up the back and one on each side, and leave the front open to walk in.
3. Lean the sloping roof
Rest one square against the top of the back wall so it slopes up over the shelter.
4. Close the two sides
Drop a triangle into each side under the slope. It sits flush and grabs the roof edge.
Short on tiles for this one? The first-pack guide covers how to grow a collection without overpaying.